Start here
From the blog
A cleaner editorial layout with a stronger hero, one featured post, and recent articles underneath.
Archive
Recent posts
Latest articles from the Alliance Chemical blog, presented with a stronger visual hierarchy.
Page 3 of 20
Blog post
Post-Novec Immersion Fluid Alternatives in 2026
Post-3M-Novec dielectric fluid alternatives for two-phase immersion cooling — engineered fluorinated, hydrocarbon, and ester chemistries compared for 2026 procurement.
Blog post
Two-Phase vs Single-Phase Cooling: Fluid Selection for Hyperscale Immersion
Two-phase vs single-phase immersion cooling fluid selection — boiling-point chemistry, dielectric properties, post-Novec landscape, and where each architecture fits.
Blog post
Inhibitor Depletion Lifecycle and the Case for Coolant-as-a-Service
Predictive inhibitor dosing and coolant-as-a-service models for hyperscale data centers — turning fluid analytics into 30% less coolant waste and longer change-out intervals.
Blog post
Glycol Cooling and Water-Use Effectiveness (WUE) in Arid-Region Data Centers
Glycol-based closed-loop cooling enables zero-evaporation hyperscale builds in Phoenix, Wisconsin, and Texas — chemistry as water insurance for arid-region data centers.
Blog post
Propylene Glycol vs Ethylene Glycol for Hyperscale Data Centers: Toxicity, Liability, and Regulation
PG vs EG selection for hyperscale data center cooling — toxicity, spill liability, regulatory tailwinds for PG, and where EG still makes sense.
Blog post
Reserve Alkalinity Testing Cadence: ASTM D2619 for Data Center Coolant Loops
ASTM D2619 reserve alkalinity testing for data center coolant loops — why pH alone is a lagging indicator, sampling cadence by rack density, and...
Blog post
GPU Thermal Density and Coolant Flow Specs: B200, GB200, and MI300
B200, GB200, and MI300 thermal density translates to specific coolant flow rates, ΔT, and inhibitor stress. Spec table + chemistry implications for AI cooling...
Blog post
Direct-to-Chip vs Immersion Cooling: Fluid Types, Chemistry, and Selection Rules
Direct-to-chip vs immersion cooling fluid types compared — water-glycol blends, single-phase dielectrics, two-phase fluorinated alternatives, and how to pick the right chemistry.
Blog post
OAT vs NOAT vs HOAT Inhibitor Chemistry for Data Center Cooling
OAT vs NOAT vs HOAT inhibitor chemistry for hyperscale data center cooling loops — selection rules by metallurgy, life expectancy, mixing risks, and testing...
Blog post
The Complete Guide to n-Heptane: Grades, Properties, Industrial & Laboratory Applications
Complete technical guide to n-heptane — ACS vs Technical grade, boiling point, safety (UN1206), and top industrial & laboratory applications.
Blog post
What Are Odorless Mineral Spirits? Uses, Safety & When to Choose Low-Aromatic Solvent
Odorless mineral spirits remove ~99% of aromatic hydrocarbons for indoor use — cabinet shops, gun cleaning, fine art, electronics. Full buyer’s guide, safety specs,...
Blog post
How to Acid Etch & Stone Wash a Knife at Home: The Complete Bladesmith’s Guide
Step-by-step guide to acid etching and stone washing a knife at home with ferric chloride. Covers dilution ratios, Damascus pattern reveals, folding-knife masking, stone...